High Quality Materials

Underfloor Heating Technologies source all of our products from European suppliers. We choose to limit our selection of suppliers to ensure that the quality of the products we offer meet the high standards we demand. Our two main suppliers are Emmeti UK and Heatmiser.

To find out more about our suppliers click here


Wide Range of Control Options

Emmeti Controls

Emmeti Electromechanical Dial Thermostat.

Emmeti Electromechanical Dial Thermostat.

A range of electromechanical wall mounted thermostats. Simple to use dial operation with temperature range up to 30oC. Choice of models including ‘call for heat’ light, on-off switch and heating/cooling/off switch, 230V operation with 24V operation on basic model only. Temperature range limiting stops for use in care homes, public buildings etc

Features include: LED calling for heat light, temperature range 5oC to 30oC, temperature differential 1.4oC, on-off and heating/cooling switch options.


Emmeti Electronic Dial Thermostat.

Simple to use dial operation with temperature range from 6oC to 30oC. Accurate temperature control for maximum comfort – differential 0.5oC, including night setback (NSB) models (2oC – 7oC). Choice of models including 230V and 24V. Optional remote sensors – enables thermostat use with bathroom applications.

Emmeti Electronic Dial Thermostat.


Emmeti Electronic Tamperproof Thermostat.

Emmeti Electronic Tamperproof Thermostat.

Electronic thermostat with concealed dial adjustment available in 230V and 24V versions. Both models include variable night setback (NSB) operation from 2oC to 7oC (default 4.5oC) when used with a suitable timeswitch.


Emmeti CS-11 TimeClock.

Electronic digital single channel timeswitch enables the time control of Underfloor or Wall Hung Radiator circuits. Programming allows 6 on/off events per day as 7 day, 5 + 2, 6 + 1 and 24 hour programmes. Designed to be fitted to a 35mm single gang back box. 230V or 24V versions available.

Emmeti CS-11 TimeClock.


Emmeti CS-11 7 Day Programmable Room Thermostat.

Emmeti CS-11 7 Day Programmable Room Thermostat.

The CS-11 7 Day Programmable Room Thermostat is available in 230v and 24v options. Features include, large, clear LCD screen, frost protection, temperature limiting when using a 10k remote sensor. A 10k remote sensor in casing is aslo available. Both options are low profile, designed to be fitted to a 35mm back box.


Emmeti EWC Wiring Centre.

A range of electrical wiring centres for Under Floor Heating and Wall Hung Radiator manifold systems. EWC-1 unit is available in 230V or 24V and includes circuit indicators, on/off switch and boiler/pump terminals.
Connections for up to 8 room thermostats, manifold circulating pump, central timeswitch, electro-thermic actuators , boiler signal.

LED indication for each circuit, pump and boiler. On/off switch for safe isolation. Earth continuity terminals included. 24V version includes a 50VA transformer with the capacity to connect up to 15 x 3W actuators.


Emmeti EWC Wiring Centre.


Heatmiser Controls

Heatmiser Slimline Programmable Room Thermostat.

Heatmiser Slimline Programmable Room Thermostat.

The Heatmiser Slimline is a 5/2 day or 7 day programmable thermostat with a back light. The Slimline thermostat is available in 230v and 12v versions and offers optimum start, a feature were the thermostat calculates the amount of heat up time required, and a temperature hold feature which allows for a desired set temperature to be set for a specific duration. 


Heatmiser NeoStat Programmable Room Thermostat.

The Heatmiser neoStat is a 5/2 day or 7 day programmable thermostat with a back light neoStat can operate in Timer or Heating Mode and can be used with remote sensors. The neoStat is available in 230v and 12v versions and offers optimum start, a feature were the thermostat calculates the amount of heat up time required, and a temperature hold feature which allows for a desired set temperature to be set for a specific duration.

The neoStat communicates wirelessly with the neoHub to offer a reliable and scalable network system. The mains powered neoStat automatically repeats the data signal from other neoStats in the home. If there are no neoStats within range the neoPlug or Boost can be used to extend the communication distance.

Heatmiser NeoStat Programmable Room Thermostat.


Heatmiser NeoHub.

Heatmiser NeoHub.

The neoHub handles all of the network communication between the neoStat, neoAir and neoPlug and is very much the brain of the Neo System. Therefore you will require one if you’re looking to control your heating hot water system from your SmartPhone.

The neoHub connects to your home router by an ethernet cable, so one free port is required. The neoHub is very much plug and play and pairing neoStat’s, neoAir neoPlug to the neoHub Gen 2 couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In Home and Remote access of your heating, hot water and appliances.
To ensure your neoHub is always up to date, your neoHub will automatically download and install updates so you will always benefit from the very latest software enhancements.


Heatmiser Wiring Centre.

The Heatmiser UH8  can be used in conjunction with 230v thermostats. The Heatmiser UH8-N  can be used in conjunction with Heatmiser 24v thermostats. The UH8 and UH8-N provide central switching of up to 8 zones actuators as well as providing an output for a hot water cylinder, the system boiler and pump.

When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone.

Heatmiser Wiring Centre.


Underfloor Heating Componets


iDRO 741 Series Manifold fitted with a ESBE T4 Pump Control Set with Wilo 25/6-SCU Pump

iDRO Underfloor Heating Manifold.

Designed for underfloor heating the iDRO 741 series Underfloor Heating Manifold incorporates the ESBE T4 Pump Control Set which includes an integrated mixing valve, with an operating range of between 20° and 55°C. The ESBE T4 Pump Control Set includes a high efficiency Wilo 26/6-SCU pump. The flow rail has a double regulating red sleeved 0 – 4 l/min flow meter per circuit that allows individual circuit flow regulation and isolation with visual flow indication. Return rail has a white capped integrated electrothermic body to accomodate an electrothermic actuator per circuit.


Electrothermic Actuator Head.

An electrothermic actuator head is, essentially a 2 port zone valve that opens and closes the port to the underfloor loop when energised by the room thermostat. The electrothermic head is fitted to the return manifold bar and are available in 230V or 24V versions.

Electrothermic Actuator Head.


16mm OD MultiLayer Composite Pipe.

16mm OD MultiLayer Composite Pipe.

Our 16mm outside diameter underfloor heating pipe has a 2mm thick waall and is made from a 5 layer composite material, using PE-RT as the inner and outer layers coupled with a 0.2mm butt welded aluminium core. Maximum operating pressure 10 bar; maximum operating temperature 70oC.


Permimeter Strip.

Our 150mm wide 8mm thick perimeter strip comes in 25m rolls. It has a Overlap skirt (overlap creates a barrier between floor insulation and edging strip) and an adhesive back for easy application to the wall.

Permimeter Strip.


Aluminium Diffuser Trays.

Aluminium Diffuser Trays.

To suspend Underfloor Heating pipe between joists or beneath wooden flooring. They can also be used with castellated panels to give even dissipation of heat. The 400mm wide trays are available with double or triple channels at 200mm or 133mm centres. Suitable for 16mm pipe.